Close Switcher
Global Page
Asia-PacificEuropeIndiaNorth AmericaSouth America
BeneluxGermanyRussiaSouth AfricaSlovakiaSpain

2011

News Archive

MesserSoft
12/12/2011

More than metal at Samuel, Son & Co.

Milwaukee / USA - Carbon steel, aluminum and stainless steel are the backbone of Samuel, Son & Co., Limited, but the company offers much more. OmniBevel 2011 is now used for metalworking in the Milwaukee office.

MCS Europe
11/28/2011

Gratings, well cut

Lichtgitter, based in Stadtlohn / Germany, is one of the world´s leading manufacturers of gratings and sheet metal profile gratings. Optimal cutting of the gratings is now ensured by the MultiTherm® flame cutting machine with plasma bevel cutting head from Messer Cutting Systems.

MesserSoft
11/07/2011

Large order from China

Hangzhou / China - 40 OmniWin 2011 Professional licenses go on an errand to Messer Cutting Systems China.

MCS World
10/31/2011

International offensive with fresh homepage

Revised design, new content, streamlined user interface and new features: Messer Cutting Systems has re-launched its website and presented a new corporate design. The aims of the new website are improved support of customers and prospects, as well as the company's positioning as a competent consultant for thermal cutting and as a "global player".

MesserSoft
10/31/2011

LISEGA Inc. follows the German model

Kodak / USA - LISEGA in the United States now relies on the software of MesserSoft. In Kodak branch now OmniWin 2011 Classic Professional is used.

MesserSoft
10/24/2011

OmniMat 6500 and OmniBevel 2011 for Slovakian Group

Považská Bystrica / Slovakia - along with a OmniMat 6500 omniBevel 2011 will be delivered to Považská Bystrica for the RAVEN Group.

MCS Europe
10/17/2011

Outokumpu President visited new production site

The new president of Outokumpu, Dr. Mika Seitovirta, whit his General Manager of Italy Dr. Marco Assandri visited the new cutting center of stainless steel sheets in Castelleone, Cremona. In the new center, Outokumpu plans to cut about 3500-4000 tons / year when fully operational, with two shifts.

MesserSoft
10/17/2011

"A group on the move" with OmniWin 2011 Professional

Pompadour Cedex / France - The company's vision, "A group on the move" of the French SICAME corresponds entirely with the use of the spectrum OmniWin 2011 Professional, because the software keeps cutting machine in motion.

MesserSoft
10/10/2011

Premium Support for LISEGA

Zeven - The premium level for support ofproducts is the level Support Level Gold. LISEGA uses this level in the multi-license version.

MesserSoft
10/03/2011

OmniWin 2011 Classic Professional for Avezaat Staal B.V.

Vlaardingen / The Netherlands - The Avezaat Staal BV now uses OmniWin 2011 Classic Professional for their extensive cutting tasks ordered by their customers.

MesserSoft
09/26/2011

Campus Bornholm new Education Partner

Ronne / Denmark - Campus Bornholm has qualified as MesserSoft Education Partners (MEP) and will train future students for OmniCalc and OmniWin software.

MesserSoft
09/19/2011

Support Order from Nakilat

Qatar - Security, stability and availability were the arguments, why Nakilat has opted for professional software support.

MCS Europe
09/11/2011

Messer Cutting Systems first manufacturer to be certified

The 'Deutscher Schneidverband®' (German Cutting Society) from Solingen certified Messer Cutting Systems GmbH from Groß-Umstadt as the first German gantry cutting machine manufacturer.

MesserSoft
09/05/2011

Astra Evangelista once again extended Software-based

Buenos Aires / Argentina - The Argentine company Astra Evangelista (AESA) is expanding its production again, with additional licenses of OmniWin and OmniBevel with OmniUnfold.

MesserSoft
08/29/2011

OmniWin and OmniBevel at Okskaya shipyard

Navashino / Rus - Together with a OmniMat Okskaya yard received OmniWin and OmniBevel.

MCS Europe
08/28/2011

25,000 tons of steel for new mega bridge

Hanover-based company Eiffel Deutschland Stahltechnologie has been awarded the contract to build one of the largest steel bridges in Germany.

MesserSoft
08/22/2011

Brazilian consulting company uses OmniBevel

Sao Paulo / Brazil - One of Brazil's leading energy consulting firm has decided to use OmniBevel.

MesserSoft
08/15/2011

OmniWin optimized U.S. steel service

Manassas / USA - OmniWin, software for professional designing and nesting, supports BMG Metals, Inc. in the daily cutting tasks.

MCS Europe
08/14/2011

Steel memorial

ThyssenKrupp Steel Europe donated a steel sculpture in memory of the victims of the Duisburg Love Parade disaster in 2010. The creation of this memorial also involved the use of a Messer machine.

MesserSoft
08/08/2011

Even for SMEs

Kirchheim-Ries - Mahler Metal demonstrates that OmniWin is perfectly usable in Small and Medium Sized enterprises.

MesserSoft
08/01/2011

OmniWin for Cegelec Morocco

Casablanca / Morocco - In Morocco, too OmniWin is in place successfully. Cegelec Morocco uses the software for maximum flexibility at minimum cost.

MCS Europe
07/31/2011

Clean inner contours at Liebherr

Ehingen - Liebherr, one of the world’s leading manufacturers of construction machinery, will open up the challenging theme of cutting interior contours with plasma technology by the extended use of professional IT solutions.

MesserSoft
07/25/2011

SLP Group Ltd. builds with OmniWin

Tyne & Wear / GB - For the construction of platforms, the SLP Group focuses on the Messer Cutting Systems Multitherm machine in combination with the software OmniWin.

MCS Europe
07/17/2011

OmniMat® successfully integrated

Stürm, the Swiss steel and metal producer based in Goldach, put a new Messer OmniMat® with two plasma bevel cutting units and a drilling unit into operation in December 2010.

MCS Europe
07/03/2011

AMBAU training program successfully completed

AMBAU GmbH (Gräfenhainichen, Germany) produces tubular steel towers and steel foundations for the wind energy industry at four sites in Germany. The company uses five Messer OmniMat® machines in this process.

MesserSoft
05/23/2011

Paneel Cutting at the Gdansk Shipyards

Gdanska / Poland - The Stocznia Gdanska, Gdansk shipyard, cuts its panels now with a MesserSoft software product.

MesserSoft
05/16/2011

OmniBevel builts viaducts in France

Frouard / France - In the future art works such as the Millau Viaduct are manufactured with OmniBevel. The French company Eiffel Munch is now usinf this MesserSoft product in Frouard.

MesserSoft
05/09/2011

Energetic growth at Ambau

Cuxhaven, Germany - For the large dimensions of the towers for offshore wind turbines AMBAU GmbH has equipped some plants with special technology. At the Cuxhaven plant and the plant in Gräfenhainichen OmniWin, OmniBevel and OmniUnfold are in use.

MesserSoft
05/02/2011

OmniBevel at J. Ray McDermott Mexican Plant

Altamira / Mexico - According to the commitment to continuous improvement of equipment and infrastructure, the material flow and management of existing facilities OmniBevel is now in use in Mexico at J. Ray McDermott.

MesserSoft
04/18/2011

New Releases for OmniWin 2011 und OmniWin 2011 Classic

Groß-Umstadt, Germany - The new releases of OmniWin 2011 and OmniWin 2011 Classic are effective immediately.

MesserSoft
04/11/2011

Cost transparency - BDE is key to success

Stuttgart, Germany - The recent VDMA study clearly states. Decision makers in engineering do not follow any hype, but target investments to topics that provide a direct benefit and improve performance.

MesserSoft
04/04/2011

Systems, Inc. on course for growth

German Town / USA - The Systems, Inc. is on growth and expansion course. Now supported by OmniWin for machine-production environment.

MesserSoft
03/28/2011

Carbowelding buys OmniWin

Sevilla / Spain - From Seville Carbowelding Welding delivers consumables for the whole of Spain. The manufacture of products is supported by OmniWin.

MesserSoft
03/21/2011

OmniWin used of sheet piles

Atlanta / USA - For the production of innovative, powerful and inexpensive sheet piles Catsink uses OmniWin.

MesserSoft
03/14/2011

OmniWin CADNest for India's steel industry

Coimbatore / India - The number of OmniWin licenses, which are supplied by Messer Cutting Systems India is growing rapidly due to the high demand of the Indian domestic industry for steel products.

MesserSoft
03/07/2011

OmniWin OmniBevel and the industry leader for milling

Saginaw / USA - OmniWin and OmniBevel During support the production process at one of the largest mills in the United States.

MesserSoft
02/21/2011

Stürm AG orders OmniCalc 2011

Goldach / Switzerland - Stürm signed an agreement to introduce OmniCalc 2011 and OmniSchedule 2011.

MesserSoft
02/07/2011

MesserSoft achieved Microsoft Silver Status

Dortmund, Germany - MesserSoft has achieved Silver Certified Partner Status as an ISV (Independent Software Vendor).

MesserSoft
01/28/2011

Special bevel cuts for Pont Hans Wilsdorf

Geneva / Switzerland - The Swiss city of Geneva awarded the following year a further attraction: a futuristic bridge, built with Messer cutting machines and bevels cuts of OmniBevel.