The Slagger®

Pushes Slag from the Table in 5 Minutes

The Slagger cutting table is like no other in its ability to move the slag. Whether produced from oxyfuel or plasma cutting, it collects slag from the table bottom to a collection pan at the end of the table in under 5 minutes. The Slagger table can handle material up to 200mm thickness.

This is accomplished by a patented pusher type blade that is propelled forward with a positive rack and pinion drive. When the blade reaches the end of the table, the slag is pushed into a pan located in the floor for disposal later.

The Slagger is also an excellent smoke removal table. Smoke is drawn from the table by a side duct that is divided into zones. The zones open only at the cutting machine location.

Key Features:

Table is cleaned once a day in 5 minutes
Small parts can be retrieved easily
The dust collector keeps the operating environment clean
Table does not have to be disassembled to remove the slag
Table Sizes available: Width - from 2m - 8m, Length - from 3250mm to 40m
Cutting Tools accommodated: All dry plasma systems, Oxyfuel up to 20 torches
Material Thickness Capacity: Light gauge to 200mm plate standard, other thicknesses available upon request