close switcher global page

The Slagger®

Pushes Slag from the Table in Five Minutes

The Slagger® cutting table is like no other in its ability to move the slag. Whether produced from oxyfuel or plasma cutting, it collects slag from the table bottom to a collection bucket at the end of the table in under five minutes. The Slagger® table can handle material up to four inches thick. Larger plate upon request.

This is accomplished by a patented pushing blade that is propelled forward with a positive rack and pinion drive. When the blade reaches the end of the table, the slag is pushed into a slag bucket located in the floor for disposal later. (see small photo left hand corner)

The Slagger® is also an excellent smoke removal table. Smoke is drawn from the table by a side duct that is divided into zones. The zones open only at the plasma cutting machine location.

Key Features:

  • Table is cleaned once a day in five minutes, depending on table length.
  • Small parts can be retrieved easily.
  • The dust collector keeps the operating environment clean.
  • Table does not have to be disassembled to remove the slag.
  • Table Sizes Available: Widths from 6' to 24', (1.8288m to 7.3152m) Lengths from 10' to 200', (3.048m to 60.96m).
  • Cutting Tools Accommodated: All dry plasma systems, oxy-fuel up to 20 torches.
  • Material Thickness Capacity: Light gauge to four inch plate standard, other thicknesses available upon request.