Close Switcher
Global Page
Asia PacificEuropeIndiaNorth AmericaSouth America

The Slagger®

Pushes Slag from the Table in Five Minutes

The Slagger® cutting table is like no other in its ability to move the slag. Whether produced from Oxyfuel or Plasma cutting, it collects slag from the table bottom to a collection pan at the end of the table in under five minutes. The Slagger® table can handle material up to four inches thick. Larger plate upon request.

This is accomplished by a patented pusher type blade that is propelled forward with a positive rack and pinion drive. When the blade reaches the end of the table, the slag is pushed into a pan located in the floor for disposal later. (see small photo left hand corner)

The Slagger® is also an excellent smoke removal table. Smoke is drawn from the table by a side duct that is divided into zones. The zones open only at the cutting machine location.

Key Features:

  • Table is cleaned once a day in five minutes, depending on table length
  • Small parts can be retrieved easily
  • The dust collector keeps the operating environment clean
  • Table does not have to be disassembled to remove the slag
  • Table Sizes Available: Width from 6' to 24', (1.8288m to 7.3152m) Length from 10' to 200' (3.048m to 60.96m)
  • Cutting Tools Accommodated: All dry plasma systems, Oxyfuel up to 20 torches
  • Material Thickness Capacity: Light gauge to four inch plate standard, other thicknesses available upon request