close switcher global page

Single Position Oxyfuel Bevel Unit

For X·Axls Bevel Cuts

Manually adjusted Single Position Triple Torch Oxyfuel Bevel Cutter for straight line bevels with manual gas adjustment and manual ignition. Bevels can be cut in the X axis only. Height sensing is carried out by an electromechanical devise that rides on the plate.

The Single Position Triple Torch Oxyfuel Bevel Unit provides weld preparation edges and plate squaring in a single pass. Cutting a “V”, “Y”, or “K” cross section in one pass, the manually adjusted Triple Torch Oxyfuel Unit is designed to make a bevel cut in the longitudinal (X) axis. Height sensing is achieved by an electromechanical device that rides on the plate.

Key features:

  • Provides plate squaring and weld preparation edges
  • Bevel angles up to 45°
  • Torches may be adjusted from .375” to several inches apart using rackable dovetail horizontal slides providing for a wide range of bevel angles that can be cut on a variety of material thicknesses
  • Height control is locked out when the electromechanical devise runs off the plate, maintaining proper height through the end of the cut.
  • Often used in combination with a Three Position Oxyfuel Bevel Unit to accurately establish plate width.