close switcher global page

Bevel-R™

5-Axis, Compact Plasma Bevel Unit

Messer Cutting Systems Bevel-R™ can accurately cut bevel profiles (non-vertical) on almost any contour. Designed rigid compact to integrate on to our unitized machines. With +/-45° with unlimited winding allows for contour beveling for V, Y and K bevels.

When programmed to cut at bevel angle, the angle offset, compensation and feed rate are controlled by the same NC part programs, while other parameters are input by a database. The system is used to create contour bevels of V, X, Y or K for weld-preparation surfaces or for active cutting edges like on earth engagement tools. Bevel and land edge configurations can be created via multiple passes.

Key Features:

  • AC drives for high performance.
  • The SureStop Collision Senor for quick, simple torch realignment for plasma cutting.
  • Quick torch focal point adjusts for easy consumable changeover.
  • Automatic torch height is controlled by an analog arc voltage with an accuracy of + / - .006 inches so part accuracy is maintained during bevel cutting.
  • Maximum bevel angle +45° to -45°.
  • Response time from 0 to 45° is less than two seconds.
  • Initial height sensing from torch tip contact eliminates offsets and reduces cycle time.
  • Vertical travel of 10.24" provides cutting for a wide range of part types.
  • Types of bevels K,V, X, Y, I
  • .