close switcher global page

Infinity Rotator ∞

For all bevels on plasma contour cuts

The Infinity Rotator provides a continuous rotation is capable of accurate bevel cutting in a (non-vertical) contour. When the machine is programmed to cut at a bevel angle, the current and stand-off height is controlled by the same NC part program on the Global Control Plus.

The rotator is used to create bevels for weld-preparation surfaces or for active edges as used on earth engagement tools. Bevel and land edge configurations can be created via multiple passes.

The bevel angle is automatically set using a combination of A-Axis and C-Ais interpolation by the Global Control. The C-Axis may be programmed as a positioning axis or a coordinated motion in conjunction with the X/Y linear axis. When operated along with X/Y motion, the C-Axis will maintain the bevel position tangent to the direction of travel.

Key Features:

  • AC drives for high performance.
  • Programmable arc current, arc voltage, and bevel angle.
  • Infinite C-axis rotation at a rate of 75 RPM, reduces cut cycle and programming time.
  • Quick torch focal point adjustment for easy consumable changeover.
  • Lateral and vertical torch "decoupler" collision detection to prevent torch damage in event of a collision.
  • Automatic torch height control by analog arc voltage with an accuracy of +/- .006" (+/- 0.15 mm) so part accuracy is maintained during bevel cutting.
  • Resultant piece part bevel angles of +50 degrees through -45 degrees.
  • Compound Skew Axis System for high flexibility and productivity.
  • No cumbersome arc segments to risk collision or inhibit the cut.
  • Unlimited C-Axis rotation.